Products
Black PTFE Packing
  • Black PTFE PackingBlack PTFE Packing
  • Black PTFE PackingBlack PTFE Packing

Black PTFE Packing — Aramid + Graphite + PTFE Composite for Demanding Dynamic Seals

Taifno's black PTFE packing combines aramid strength, graphite self-lubrication and thermal conductivity, and PTFE corrosion resistance in one braided composite. Friction low, wear- and extrusion-resistant, pH 0-14, -180 to 260°C, linear velocity up to 25 m/s. Three models: oil-impregnated, aramid-interlaced, four-corner aramid. Stocked 3×3-50×50mm, no MOQ, free samples, factory-direct quote.

    Buyers searching for a black PTFE packing supplier or a graphite PTFE braided packing price per kg usually need one thing: a dynamic seal that survives high linear velocity, heat and solids without destroying the shaft. Taifno's black PTFE packing combines aramid strength, graphite self-lubrication and thermal conductivity, and PTFE corrosion resistance in one precision-braided composite, made in our ISO 9001 plant in Ningbo, China.

    Black PTFE packing braided structure
    pH Range0-14
    Temperature-180 to 260°C
    Max Velocity25 m/s
    Valve Pressure≤200 bar
    Stocked Size3×3-50×50 mm
    Models3 options

    Black PTFE packing is a versatile high-performance composite packing for both static and dynamic seals, reinforced with aramid for strength, lubricated with graphite for low friction, and protected with PTFE for corrosion resistance. It solves the wear, heat and leakage problems of pump and valve dynamic seals and is the preferred upgrade solution for industrial dynamic sealing.

    Core Performance Advantages of Black PTFE Packing

    1. High Strength and Wear Resistance

    Aramid fiber, with its "artificial metal wire" ultra-high strength, serves as the packing skeleton, significantly improving tear strength, extrusion resistance and deformation resistance. Under high linear velocity and high media pressure, the structure remains tight and intact. Service life is several times longer than conventional white PTFE packing.

    2. Self-Lubricating and Low Friction

    High-purity graphite particles uniformly dispersed in the formulation, combined with the PTFE matrix, deliver an extremely low friction coefficient. A stable solid lubricating film forms on the shaft or sleeve surface, preventing dry friction and uneven wear. The oil-impregnated version adds high-temperature silicone oil for further protection at start/stop and low speed.

    3. Excellent Thermal Conductivity

    Graphite's superior thermal conductivity quickly conducts and dissipates friction heat, preventing heat buildup in the sealing cavity and solving high-temperature softening, aging and burning issues of conventional PTFE packing. Suitable for long-term high-linear-velocity duty, with maximum linear velocity up to 25 m/s.

    4. Broad Chemical Resistance

    The high-purity PTFE matrix withstands pH 0-14 across most industrial media, including fresh water, high-temperature steam, wastewater, oils, weak acids and alkalis, and organic solvents. Only incompatible with strong oxidizing agents such as fuming sulfuric acid, concentrated nitric acid and high-temperature fluorine gas.

    5. Suitable for Particle-Laden Abrasive Media

    The dense, uniform and moderately flexible braided structure offers excellent compression and wear resistance, designed for abrasive media containing solid particles such as syrup, pulp, grinding fluids and sediment-laden wastewater. It resists particle erosion and prevents premature failure from media impurities.

    6. Clean, Safe and Compliant

    Made from pure materials with no toxic leaching and no contaminant residues, the packing is safe for industries with strict cleanliness requirements, including food processing, pharmaceuticals, papermaking and chemical fiber, with no secondary contamination of media or production environment. For related sealing options, see our PTFE and specialty packings range.

    Technical Specifications: Three Black PTFE Packing Models

    Model 1: Oil-Impregnated Black PTFE Packing

    Mainstream Choice

    Color: Solid black

    Density: 1.4-1.6 g/cm³ (oil-impregnated typical 1.65 g/cm³)

    Service temperature: -180°C to 260°C

    Pressure: Rotary pumps ≤20 bar; reciprocating pumps ≤100 bar; valves ≤200 bar

    Linear velocity: Rotary pumps ≤16 m/s; reciprocating pumps ≤12 m/s

    pH range: 0-14

    Characteristics: Silicone oil impregnated, excellent lubrication, extremely low friction loss, suitable for most dynamic sealing applications.

    Model 2: Aramid-Interlaced Black PTFE Packing

    High Pressure

    Color: Black / zebra-stripe interlaced

    Service temperature: -180°C to +260°C

    Pressure: 4-25 MPa

    Linear velocity: 0-20 m/s

    pH range: 2-13

    Characteristics: Interlaced structure provides higher strength and extrusion resistance, suitable for high-pressure, high-speed and heavy-load applications.

    Model 3: Four-Corner Aramid Black PTFE Packing

    Wear Resistant

    Color: Solid black

    Service temperature: -180°C to +260°C

    Pressure: 4-25 MPa

    Linear velocity: 0-20 m/s

    pH range: 2-13

    Characteristics: Four-corner reinforced structure, wear-resistant and deformation-resistant, suitable for high-wear and high-pressure dynamic sealing.

    Notes: Values above are typical measured data. Different formulations and processes may yield slight variations.

    Not for use with strong oxidizing agents, including fuming sulfuric acid, concentrated nitric acid and high-temperature fluorine gas.

    The silicone oil-impregnated version offers superior lubrication and is the mainstream choice for most applications. For complex conditions, contact our technical team for precise model matching.

    Product Specifications and Customization

    Standard Specifications (Stocked)

    Cross-section sizes: 3×3 mm to 50×50 mm, square and round profiles available.

    Supply forms: 5 kg/roll and 10 kg/roll standard spool packing; pre-cut finished packing rings.

    Custom Capabilities (Made-to-Order)

    Size customization: various non-standard cross-section sizes for special sealing cavity equipment.

    Weave customization: standard square braid, four-corner aramid reinforced, aramid-interlaced and more.

    Performance customization: optional high-temperature silicone oil impregnation or oil-free clean versions.

    Value-added processing: precision cutting and pre-formed compressed packing rings, ready for installation upon arrival.

    What We Can Do for You

    One-stop service from standard stock to non-standard customization. Our technical team provides free optimal packing model, cross-section size and process selection based on your equipment type, media properties, temperature and pressure conditions, and linear velocity.

    Black PTFE packing braided detail Black PTFE packing roll Black PTFE packing finished rings

    Typical Applications

    ① Various Pump Equipment

    Shaft seals for centrifugal pumps, plunger pumps, reciprocating pumps, screw pumps and other industrial pumps, compatible with fresh water, steam, wastewater, oils, solvents and particle-laden slurries, solving dynamic leakage issues. For pump sealing components, see our PTFE seals and machined components.

    ② Industrial Valve Equipment

    Valve stem seals for chemical and general industrial valves, suitable for medium and low-pressure static sealing and low-frequency dynamic sealing, stable, wear-resistant and durable for long-term open/close cycling.

    ③ Agitator and Mixing Equipment

    Shaft seals for reactor agitators, material mixers and stirring shafts, particularly suitable for high-wear applications with solid particles such as pulp, syrup and grinding media.

    ④ Compressor Units

    Piston rod seals for reciprocating compressors, withstanding medium and high pressure and temperature, extrusion-resistant and wear-resistant for long-term stable compressor operation.

    ⑤ Food and Pharmaceutical Clean Industries

    Seals for food processing machinery, pharmaceutical reactor equipment and clean conveying equipment, made from clean materials with no leaching and meeting industry non-contamination production standards.

    ⑥ Chemical and Petrochemical Industries

    Seals for transfer pumps and control valves in chemical and petrochemical plants, withstanding weak acids and alkalis, organic solvents, oil and gas and other corrosive media under complex industrial conditions.

    Selection Guide

    Comparison Dimension Black PTFE Packing Conventional White PTFE Packing Pure Aramid Packing
    Core advantage High strength + self-lubrication + thermal conductivity + corrosion resistance, balanced overall performance Ultimate corrosion resistance, lowest friction coefficient, highest cleanliness Ultra-high strength, extreme wear resistance, high-pressure resistance
    Structural strength High (aramid reinforced, extrusion-resistant) Low (pure PTFE, prone to deformation and wear) Extremely high (heavy-load deformation-resistant)
    Friction coefficient Low (graphite self-lubricating) Lowest, but lacks lubrication under dry running High (tends to wear shafts, requires auxiliary lubrication)
    Thermal conductivity Good (rapid heat dissipation, prevents burnout) Poor (prone to heat buildup and aging) Fair
    Corrosion resistance Excellent (pH 0-14, except strong oxidizing agents) Best (full media compatibility) Fair (does not withstand strong corrosive media)
    Best application Pump and valve dynamic seals, high linear velocity, particle-laden abrasive media, general corrosive conditions Pure corrosive media static seals, clean non-wear conditions High-pressure heavy-load, extreme wear, non-corrosive conditions

    Selection recommendation: For pump, valve and agitator dynamic seals with high linear velocity and particle-laden media, choose Black PTFE Packing.

    For pure corrosive media with no mechanical wear in static sealing where ultimate corrosion resistance is required, choose Conventional White PTFE Packing.

    For high-pressure heavy-load and extreme wear with no corrosion requirements, choose Pure Aramid Packing.

    For complex conditions, contact our technical team for a free one-on-one precision selection recommendation.

    Quality Assurance and Certifications

    Strict raw material control: high-toughness aramid fiber plus high-purity graphite PTFE yarn, impurity-free with stable performance.

    Precision process control: standardized braiding process with precise oil content control, consistent density, hardness and lubricity across all batches.

    Third-party performance testing: complete test reports available covering wear resistance, pressure resistance, temperature resistance and corrosion resistance. For the inspection sequence, see our quality assurance process.

    Full batch traceability: production process and quality inspection data retained for every batch, with full quality traceability and after-sales guarantee.

    Black PTFE packing lab inspection Black PTFE packing quality check Black PTFE packing close-up inspection

    Installation Guidelines

    Packing sealing effectiveness and service life depend heavily on installation quality. Standardized installation effectively prevents leakage, burnout and shaft wear. Key points:

    Precise sizing: packing cross-section = (sealing cavity ID − shaft or sleeve OD) ÷ 2. Incorrect sizing leads to loose packing (leakage) or overly tight packing (shaft wear and burnout).

    Proper cutting: 90° straight cut for rotary pumps and 45° angled cut for valves, with clean smooth cuts and no loose fibers or burrs.

    Staggered layering: install each ring individually and stagger joints at 120° or 180° intervals, never aligning all joints at the same position.

    Controlled compression: avoid over-tightening and adjust gland bolts based on working pressure. For new equipment commissioning, allow initial leakage of 20-60 drops per minute and fine-tune after operation stabilizes.

    Regular maintenance inspection: for high-temperature and high-speed continuous operation, periodically inspect gland bolt torque and re-torque as needed.

    Frequently Asked Questions

    Q1: What is the core difference between black PTFE packing and conventional white PTFE packing?

    A1: Conventional white PTFE packing is 100% PTFE, offering the best corrosion resistance but low strength, poor wear resistance and weak thermal conductivity, and is suitable mainly for static sealing. Black PTFE packing is a composite of aramid, graphite and PTFE, delivering significantly improved strength, wear resistance and thermal conductivity, and is specifically optimized for pump and valve dynamic sealing under high speed, high pressure and particle-laden abrasive media.

    Q2: What media is black PTFE packing compatible with, and what are the restrictions?

    A2: It is compatible with most industrial media including water, steam, wastewater, oils, grease, weak acids and alkalis, conventional organic solvents and particle-laden slurries across pH 0-14. It is strictly not for use with strong oxidizing agents such as fuming sulfuric acid, concentrated nitric acid and high-temperature fluorine gas, which cause rapid packing corrosion and failure.

    Q3: What is the maximum service temperature of black PTFE packing?

    A3: The standard model offers continuous stable service from -180°C to 260°C. High-end GFO-modified versions can reach -180°C to 280°C, with short-term peak temperatures up to 315°C. The specific limit depends on operating conditions, media type and duration; consult our technical team for precise matching.

    Q4: How do I choose between oil-impregnated and oil-free black PTFE packing?

    A4: The oil-impregnated version is treated with high-temperature silicone oil, offering higher cross-section density, enhanced self-lubrication and lower friction loss, and suits most high-speed pump and valve rotating applications. The oil-free version offers higher cleanliness for applications with stringent silicone oil restrictions or ultra-high cleanliness requirements.

    Q5: What are the main causes of rapid black PTFE packing failure and leakage?

    A5: Four common causes: incorrect selection where material is incompatible with media or operating conditions; over-tightening that prevents friction heat dissipation and leads to burnout; over-loosening that creates excessive sealing gap and continuous leakage; and improper installation where packing joints are not staggered, creating direct leakage channels.

    Q6: What are the MOQ and lead time?

    A6: Standard specifications are stocked with no MOQ and ship within 3-5 working days. For non-standard sizes, special braiding processes and custom finished packing rings, lead time is available upon request, with expedited production available.

    Talk to Our Sealing Engineers

    Need technical support or sample requests? Our technical team offers free application analysis, equipment suitability assessment and precision model selection, customizing a dedicated sealing solution based on your equipment type, media, temperature, pressure and linear velocity. For related stock material options, review our PTFE semi-finished products.

    Request a Quote or Apply for Free Samples

    Phone: +86-18057455621

    Email: Tommy.xiao@taifno.com

    Online chat: our engineers respond within 24 hours.

    Request a Quote Apply for Samples
    Send Inquiry
    Contact Info
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept