Products
Daikin M18 PTFE Gasket
  • Daikin M18 PTFE GasketDaikin M18 PTFE Gasket

Daikin M18 PTFE Gasket

Taifno Daikin M18 PTFE Gasket is manufactured using Daikin M18 modified PTFE material for industrial sealing applications. Its creep resistance and low-permeation properties help maintain sealing performance and extend gasket service life. Contact Taifno for product specifications, customized gasket solutions, and bulk order quotations.

    We are a seal manufacturer using Daikin M18 resin — product form is finished gaskets/seals.

    Daikin M18 Gasket


    Product Form Description
    Finished Gaskets Ring / special-shaped gaskets, compression molded + sintered + precision machined
    Seals Valve seats, diaphragms, O-rings and other sealing products
    Sheets Molded sheets, can be used for on-site cutting

    Material source: 100% Daikin Japan M18 modified PTFE resin — origin certificates and material certificates available with shipment.

    FactoryFactoryFactoryFactory

    Daikin M18 PTFE Gasket vs Standard PTFE — Why Upgrade?

    Problem: Cold Flow Creep of Standard PTFE

    Standard PTFE will "cold flow" (creep) under continuous pressure — the material slowly deforms, bolt torque relaxes, sealing force decreases, and ultimately leads to leakage.

    This is the number one cause of seal failure and the most fatal weakness of PTFE materials.

    Solution: Daikin M18 Modified PTFE

    Daikin M18 is modified PTFE with an optimized molecular structure. Compared with standard PTFE, M18 has significantly improved creep resistance, a denser and smoother surface, and weldability.

    Direct Comparison: Value of the Upgrade

    Comparison Standard PTFE Daikin M18 Customer Value
    Creep Resistance Poor (cold flow evident) Excellent Bolt torque retained longer, seal life extended 2–3 times
    Surface Density With voids Dense & Smooth Lower permeability, safer for critical chemicals
    Weldability Poor Good Enables welding of PTFE parts
    Material Cost $ $$ (30–50% more expensive) Higher upfront investment, but lower total cost
    Typical Seal Life 1–2 years 3–5 years Reduced replacement frequency, lower maintenance cost
    3-Year Total Cost Higher (multiple replacements + downtime) Lower (one-time installation) Payback in 6–12 months under critical conditions

    Core Advantages

    Advantage Description Customer Value
    Excellent Creep Resistance Modified molecular structure, deformation under load significantly reduced Longer seal life, reduced maintenance frequency
    Dense, Smooth Surface More complete particle fusion after modification, no voids Low permeability, more reliable sealing
    Weldability Weldable characteristic unique to modified PTFE Enables welded connections of PTFE parts, especially for large-area applications
    High Purity Daikin M18 has higher purity, extremely low precipitation Suitable for semiconductor, pharmaceutical, fine chemical and other highly demanding conditions
    Chemical Resistance pH 0–14, resistant to almost all chemicals Highly versatile; a single material can handle a wide range of media.
    FDA Compliant Complies with FDA 21 CFR 177.1550 Suitable for food and pharmaceutical industries

    Technical Specifications

    Parameter Value Test Standard
    Material Modified PTFE (Daikin M18) —
    Tensile Strength 25–45 MPa ASTM D4894
    Elongation 300–450% ASTM D4894
    Service Temperature -200°C to +260°C —
    FDA Compliance 21 CFR 177.1550 —
    Appearance White Powder —

    △ Not Suitable For: Molten alkali metals or fluorine — PTFE is inherently incompatible.

    Applications

    Industry Specific Application Why Choose M18
    Chemical / Petrochemical Flange gaskets, reactor linings, heat exchanger seals Creep resistance + chemical resistance + weldability
    Valve Manufacturing Ball valve seats, seals Low friction + creep resistance + smooth surface
    Pharmaceutical Aseptic equipment seals, clean pipeline gaskets FDA compliant + high purity + no medium contamination
    Food & Beverage Food-grade pipeline gaskets FDA 21 CFR 177.1550 compliant
    Semiconductor High-purity chemical delivery pipeline seals High purity + low precipitation
    Electrical / Electronics Insulating gaskets, electrical insulation parts High dielectric strength

    Customer Case Study

    Case Challenge Solution Result
    Chemical Plant Standard PTFE gaskets crept and leaked on reactor flanges, replaced every 8–12 months Replaced with Daikin M18 gaskets 3 years of continuous operation without leakage, maintenance cost reduced by 60%

    TestTestTestTest

    FAQ

    Q: What is the difference between Daikin M18 and standard PTFE? Which one should I choose?

    A: Daikin M18 PTFE Gasket is modified PTFE with an optimized molecular structure. Compared with standard PTFE, M18 has significantly improved creep resistance (lower deformation under load), a denser and smoother surface, and weldability. Standard PTFE will "cold flow" (creep) under continuous pressure, leading to seal failure. Choose M18 when: high-demand seals, valve seats, equipment linings, conditions requiring creep resistance. Choose standard PTFE when: general sealing, cost-priority general conditions. M18 is 30–50% more expensive, but seal life is extended 2–3 times, and payback is achieved in 6–12 months under critical conditions.

    Q: What are the temperature and pressure limits for Daikin M18 gaskets?

    A: Temperature: continuous service -200°C to +260°C. Pressure: gaskets 10–40 bar (depending on gasket design and flange conditions). Chemical resistance: pH 0–14, resistant to almost all chemicals (only incompatible with molten alkali metals and fluorine). If you need data for your specific conditions, please provide parameters and we will calculate for you.

    Q: Can Daikin M18 gaskets be used for food or pharmaceutical applications?

    A: Yes. Daikin M18 PTFE Gasket complies with FDA 21 CFR 177.1550 food contact requirements and can be used in food processing and pharmaceutical industries. PTFE material is physiologically harmless, non-toxic, odorless and tasteless, and does not contaminate media.

    Q: What is the difference between Daikin M18 and M111?

    A: Daikin M18 and M111 are both Daikin modified PTFE products with similar core performance. M18 has higher purity and is more suitable for conditions with extremely high requirements for medium purity (such as semiconductors and fine chemicals); M111 has slight advantages in strength and elongation, and is more suitable for high mechanical stress conditions. For specific selection advice, please provide your application conditions and we will recommend for you.

    Q: What is the MOQ? What is the lead time? Do you support samples?

    A: MOQ: depends on product type and specifications, small batch customization supported. Lead time: standard specifications about 7–15 working days; special specifications require consultation. Samples: free samples supported (both new and existing customers can apply, freight collect). Payment method: T/T bank transfer (recommended). Quality assurance: 100% Daikin Japan M18 raw material; material certificates and origin certificates available.

    Send Inquiry
    Contact Info
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept