Products

Products

View as  
 
POB-Filled PTFE Tube

POB-Filled PTFE Tube

Taifno manufactures POB-Filled PTFE Tube for industrial applications requiring high wear resistance, low friction, improved creep resistance, and protection of mating surfaces. With a continuous service temperature range of -180°C to +260°C, these light-yellow PTFE composites are suitable for bearings, bushings, piston rings, seals, and sliding components. Custom diameters, POB content, PTFE rods, and machined components are available for OEM projects and bulk procurement.
POB-Filled PTFE Gasket

POB-Filled PTFE Gasket

Taifno manufactures custom POB-filled PTFE gaskets using a PTFE matrix reinforced with polyphenyl ester filler. The material is designed for industrial sealing applications requiring improved creep resistance, dimensional stability, wear performance and self-lubrication. Custom-cut gaskets, sheets, washers, valve seats and molded components are available for OEM and bulk purchasing projects. Submit the required dimensions, media, temperature, pressure and quantity for material evaluation and quotation.
PTFE-Lined Bushing

PTFE-Lined Bushing

Taifno manufactures custom PTFE-lined bushings for dry-running, high-load and low-speed motion systems. Available constructions include steel-backed sintered-bronze/PTFE bushings and PTFE fabric-lined bearings, with straight, flanged, thrust-washer and drawing-specific configurations. Send the required dimensions, load, speed, shaft material, temperature, environment, quantity and applicable standard for engineering review and factory quotation.
PTFE Bushing

PTFE Bushing

Taifno manufactures custom PTFE bushings from virgin, glass-filled, carbon-filled, graphite-filled and bronze-filled PTFE. Straight, flanged, stepped and drawing-specific sleeve bearings are available for dry-running, corrosive, clean-service and wear-intensive applications. Custom dimensions range from 1 mm to 500 mm inside diameter. Send your drawing, shaft size, load, speed, temperature, medium and required quantity for material selection and a factory quotation.
Brass-Filled PTFE Tube

Brass-Filled PTFE Tube

Taifno manufactures custom brass-filled PTFE tubes using PTFE resin compounded with 40-60% brass powder for improved wear resistance, heat transfer, creep resistance and load support. Molded tube stock, selected extruded sizes, rods, plates and machined components are available for bushings, wear rings, guide rings, piston rings and other sliding parts used with chemically compatible media. Send the required OD, ID, length, brass percentage, tolerance, quantity and operating conditions for grade review and direct factory pricing.
PEEK-Lined PTFE Composite Tube

PEEK-Lined PTFE Composite Tube

Taifno develops custom PEEK-lined PTFE composite tubes with a PEEK fluid-contact liner and a PTFE outer layer. The construction is intended for applications requiring a harder, more wear-resistant inner surface together with external chemical resistance, electrical insulation or non-stick performance. Tube OD, ID, PEEK liner thickness, PTFE wall thickness, length and interface design are manufactured to project requirements. Send the conveyed medium, concentration, particle content, flow rate, pressure, vacuum level, temperature cycle, connection method and quantity for compatibility and manufacturability review.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept